AM-II+ SPO2&TEMP Patient Monitor(with waveform and data transmitting function)
Monitoring Parameters:
Three Parameters: SPO2, TEMP, Pulse Rate, SpO2 Waveform, Bar-graph, Battery indicator
Waveforms:
Waveform: SPO2 waveform-PLETH
Features:
Monitoring SPO2, TEMP, PR & PLETH
2.8 inch color TFT LCD in real time display, displayable in big font and big screen
BlueTooth wireless is very convenient to realize reviewing the measurements in big screen via connecting PC and to upload history data to PC for review, printing or storage
Unique software for telemonitoring by transmitting data synchronously via internet
Long time monitoring and sleeping monitoring
Storage/Review trend data up to 3888 groups, data save time interval settable
Audio and visual alarm when parameters exceeded and sensor-off
Built-in rechargeable Li-ion battery, up to 15-hour running time
Battery capacity indicator. Automatic shutdown for power saving
Applications:
This oximeter could be applied in the hospital's operation room, ICU, clinic section office, Out-patient department, sickroom and emergency treatment.
Standard Packing List:
Handheld Pulse Oximeter main unit 1unit
Adult finger SpO2 sensor 1pc
Surface TEMP probe 1pc
AC power adaptor 1pc
Communication cable 1pc
The operator's manual 1pc
Selectable Accessory:
Child finger/toe SpO2 sensor
H. S. Code: 90189090
Dimension: 115x60x28mm
Net Weight: 195g
Gross Weight: 915g
Package Size: 220x160x75mm
Color: White
Specifications:
1. General
Monitoring Parameters: SpO2, PR, PLETH, Pulse strength, TEMP
Signal sockets: SpO2 socket, PR socket, TEMP socket, USB socket(for charge battery and transmit data)
2. Display screen
Type: 160 × 128 dot matrix color OLED screen
Display area: 42mm× 33mm
LED: Dual-color LED (red/green)
3. Functions
PLETH: The monitor can display PLETH waveform
Intelligent parameter monitoring screen: The monitor automatically selects the parameter measurements to display according to the probes connected to the monitor.
Audio and visual alarm: The speaker sounds the alarm and the parameter's measurement will become in red to flash on the screen. Also the same when sensor-off.
Prompting: Icons of battery capacity, pulse sound switch and alarm sound switch.
Power saving: The monitor will automatic shut down to save power. The time is settable.
Trend: Storage/Review trend data up to 3888 groups, data save time being set freely
Data storage: The saved data will never be lost even if the monitor is powered off.
Communication: Transmitting the patient's trend to a PC for display, observation, saving and printing.
4. Electrical specifications
Working Voltage: D. C. 3.7V/3000mAH
AC power adaptor
Input: AC 100 V~240V, 50/60Hz, 5VA
Output: D. C. 5V
Internal battery
Type: D. C. 3.7V/3000mAH Li-ion rechargeable battery
Run Time: 15-hour continuous operation with a new, fully charged battery (environment temperature is 25 ° C)
Recharge time: 8 hours
5. Environment
Temperature
Operation: 0° C ~ 45 ° C
Transportation and storage: -20° C ~ 60 ° C
Humidity
Operation: 15% - 95 %( noncondensing)
Transportation and storage: 10% - 95 % (noncondensing)
Altitude
Operation: 86 KPa ~106 KPa
Transportation and storage: 50KPa~106 KPa
6. Parameter Specifications
SpO2
Patient: Adult, child
Range: 0% - 100%
Resolution: 1 %
Accuracy: 70% - 99%: ± 2 %
0% - 69%: Unspecified
PR
Range: 0 bpm ~250bpm
Resolution: 1bpm
Accuracy: ± 2bpm
TEMP
Channel: 1
Input: Body surface thermal-sensitive resistor temperature sensor
Range: 0 ° C~50 ° C
Resolution: 0.1 ° C
Accuracy: ± 0.2 ° C
Audited Supplier 
){kind=link}